Ecostrad iQ Ceramic - Connecting to WiFi; Downloading the App; Connecting to the App

16
5 | Connecting to WiFi
5 – 1 | Downloading the App
The Ecostrad iQ Ceramic is designed to work with the Smart Life app.
Scan the code below to go to the app. Press install and follow the app’s
instructions to create an account.
NOTE – The Smart Life app is a constantly evolving third party system.
This guide was correct at time of printing but may differ slightly from
future versions. The app is designed to work on Android or iOS but
older software versions may affect app presentation and performance.
5 – 2 | Connecting to the App
1. Ensure WiFi control is enabled in the radiator settings. If the icon is
flashing, WiFi connection is enabled and you can move onto step 2. If the
icon is not flashing, go to section 4-4-4 and follow the instructions to enable.
2. To put the radiator in pairing mode, press to enter
standby mode and hold down until the screen
switches to the connection screen. This begins a 180
second count down, giving you 3 minutes to make the
connection on the app.
3. On the home page of the app, press + or add device.
4. Select auto scan from the top navigation.
5. The app will demonstrate that it has found the radiator. Press Next.
6. The app will ask you to enter and confirm your WiFi password.