15
4 – 4 – 4 | WiFi Function (F4)
This setting allows you to enable or disable the radiator’s connection to WiFi.
Disabling the connection is temporary: if you have already added the radiator to
your app account, disabling the connection will not remove it. You will be able to
control via the app as soon as you re-enable the connection.
• Press to put the radiator into standby mode and hold down for 5
seconds to enter the settings menu.
• Press to skip through the settings until F4 appears on the screen,
followed by the current setting. Default is “oF” – disabled.
• Use the and keys to adjust. Select “oN” to enable and “oF” to disable.
• Press to confirm and move onto the next setting.
4 – 4 – 5 | Time Synchronisation (F5)
This setting controls whether the time set on the radiator automatically synchronises
with the time on the app when the unit is controlled via WiFi.
• Press to put the radiator into standby mode and hold down for 5
seconds to enter the settings menu.
• Press to skip through the settings until F5 appears on the screen,
followed by the current setting.
• Use the and keys to adjust. Select “oN” to enable and “oF” to disable.
• Press to confirm and move onto the next setting.
4 – 5 | Child Lock
Press and hold the and keys for 5 seconds to lock the display. The icon
will appear and all keys will be locked except the standby button . Press and
hold the and keys for 5 seconds to unlock and the icon will disappear.
4 – 6 | Reset to Defaults
Press and hold the key for 10 seconds to restore the device to default settings.
4 – 7 | Standby Mode
The button can be used to turn the radiator on or put it in standby mode. In
standby mode, the current time is displayed.
To Next Page
Loading...
