9
4 | Control Panel
4 – 1 | Power Switch
Before first use, the radiator must be
switched on at the mechanical switch
at the back of the unit.
This switch must be left in the ON
position if you want the radiator to
remember its set times and programs.
Memory function
In the event of power failure or
disconnection, settings will be saved
for approximately 2 hours. If power is
restored in that time, the radiator will
continue to work as per previous
settings. If power is restored after 2
hours, weekly programming, time and
working mode will need resetting.
To Next Page
Loading...
