ECOVACS Deebot M8 - Programming the Robot

13
EN
3. Operating and Programming
Set the Current Time of Day
*
All scheduled cleanings are performed in AUTO Cleaning Mode.
*
Before programming the robot, press any button on the Remote Control to wake up the Remote Control
LED Screen. The Remote Control uses a 12-hour clock with “AM” and “PM” indicators.
3.4 Programming the Robot
DM85 has a Time Scheduling function. DM85 can be programmed to automatically clean once
or twice per day, at specific times, even if nobody is at home. The current time of day and the
cleaning times are scheduled using the Remote Control.
Press
button on the Remote Control to conrm
and save the current time of day.
Press the up and down Direction Control
Buttons
to adjust “hour” and “minute”
number. Press the left and right Direction
Control Buttons
to switch between hour,
minute and AM/PM.
Press
button on the Remote Control until
ashes and
illuminates on the Remote
Control LED Screen.