Cleaning the Main Brush
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has
sharp edges.
Turn the robot over. Push both buttons on the Main Brush Option towards the center of the robot.
Remove the Main Brush Cover.
Remove the Main Brush.
Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush.
4.3 Main Brush, Direct Suction Option and Side Brushes
AA
BB
4. Maintenance
Cleaning the Side BrushesCleaning the Direct Suction Option
Remove the Side Brushes. Wipe the Side Brushes
and their slots with a dry cloth.
Wipe the Direct Suction Option clean with a
dry cloth.
Pull out the plastic nut on the end of the Main Brush. Remove the plastic caps on both ends. Clean any tangled
hair or debris from both ends of the Main Brush and inside the plastic caps.
To Next Page
Loading...
