3.7 Alarm Indicator and Sounds
Alarm Sound Problems Solution
One Beep Driving Wheel Malfunction
Check Driving Wheels for tangled hair or
debris and clean.
Two Beeps Main Brush Malfunction
Check Main Brush for tangled hair or
debris and clean.
Three Beeps Driving Wheel Malfunction
Turn over the robot. Press Driving
Wheels to check for a clicking sound.
If they do not click, please contact
Customer Service.
Four Beeps Dust Bin Malfunction
Remove the Dust Bin and re-install it
properly. If the robot still emits the alarm,
please contact Customer Service.
Five Beeps Low Battery
Manually place the robot on the Charging
Dock to charge.
Six Beeps Side Brush Malfunction
Check Side Brush for tangled hair or
debris and clean.
Seven Beeps
Anti-Drop Sensor
Malfunction
Check Anti-Drop Sensors for dust and
clean.
If the robot detects a problem, it emits an alarm sound and the AUTO Mode Button flashes
RED. Please troubleshoot according to the alarm sounds.
3. Operating and Programming
To Next Page
Loading...
