ECOVACS Deebot M8 - Page 18

16
EN
EN
3. Operating and Programming
Attach Smart Clean Cloth
Remove
Attach the Smart Clean Cloth to the Smart Clean
Reservoir.
Attach the Smart Clean Reservoir to the bottom
of the robot. Insert the tabs on the Smart Clean
Reservoir into the Smart Clean Reservoir Slots on
the bottom of the robot until you hear a click.
After DM85 finishes cleaning, remove the
Smart Clean Reservoir from DM85, empty any
remaining water from the Water Reservoir, and
remove the Smart Clean Cloth.
2
Start
Select the desired Cleaning Mode. DM85 sweeps and mops in the selected mode.
3
4