ECOVACS DEEBOT8 - Cleaning Cloth; Main Brush, Direct Suction Option and Side Brushes

18
EN
4. Maintenance
4.2 Cleaning Cloth
4.3 Main Brush, Direct Suction Option and Side Brushes
If the mopping feature was used, remove the
Cleaning Cloth Plate from DEEBOT 8 and
remove the Cleaning Cloth.
Wash the Washable/Reusable Cleaning Cloth
by hand or in the washing machine, and lay at
to dry. Throw Disposable Cleaning Cloths away.
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
*
Wipe the Direct Suction Option clean with a
dry cloth.
Cleaning the Main Brush
Cleaning the Direct Suction Option (D83
model ONLY)
Turn the robot over. Push both yellow buttons
below the Main Brush Option at the same time,
and remove the Main Brush Cover. Remove
the Main Brush. Use the Multi-Function
Cleaning Tool to cut off and remove any hair
tangled around the Main Brush.