3.3 Ecowitt APP Network Configuration
There are three ways to configure the network：
1.Scan QR Code.
2.WIFI Provisioning.
3.Manually Adding.
Please select one of them to complete the network configuration.
After you completed if you want to change your router, please
follow this section again.
3.3.1 Scan QR Code
1. Connect the GW2000 to the Ethernet cable(not included).
2. Open Ecowitt App, click "My Devices", and click "Add New
Devices", choose the model of GW2000 from the product listing.
Click "Scan QR Code" .
To Next Page
Loading...
