ECOWITT GW2000 - Reset Button & Led Indicators

4
1.4 Reset Button & LED Indicators
Figure 4
Item
Function
Reset
Button
Hold for 5 seconds to enter the Wi-Fi
configuration mode
Hold for 10 seconds to restore factory
settings
Ethernet
Indicator
LED
On: Ethernet cable is connected
Blink: Data received
Off: Ethernet cable is not connected
Sensor
Link LED
(Blue)
On: Blinks when one packet of wireless
sensor data was received
Off: No wireless sensor data is received
 How to solve?
Please check whether the sensor is
working normally, and make sure that
the sensor can connect to the device