1. Make sure your mobile device is connected to the same Wi-Fi
network.
2. Click "…" on the top right corner and choose "Calibration".
3. For a certain parameter. Calculate the offset of data from the
accurate weather station and ecowitt sensor.
4. Fill in the offset from step 3, and click Save.
7.2 Rain Settings on The Ecowitt APP
1 Rainfall Data Priority Setting
If you have multiple rainfall sensors, you can set the priority to
display the data from one of them.
You can choose between a Traditional Rain Gauge or a
Piezoelectric Rain Gauge.
To Next Page
Loading...
