8 Use on Web UI
The Web UI is an essential tool for managing the device. You
can use it to check the network connection status, set up weather
services (WU, WOW, Weather Cloud, custom server), view live
data, manage sensors, make calibrations, and more.
8.1
How to Access the Web UI
Holding the "Reset" Button for 5 seconds will turn on its Wi-Fi
AP for 5 minutes. Connect to the GW2000's AP. Enter
192.168.4.1 in the browser. Log in with the default username and
password, which is blank. If your gateway is connected to a local
network, the WebUI can also be reached via the IP address the
gateway has received or has been.
Settings changes, such as registered Sensor IDs, are saved three
minutes after power-up. However, changes made via the web
interface are saved immediately and retained even if power is
lost.
1.WiFi configuration
Ensure that your mobile phone or laptop is connected to the
GW2000’s hotspot emitted by the device.
To Next Page
Loading...
