8.3
Device Setting on Web UI
This page supports viewing or setting:
(1) Device sensor reception frequency (view only)
(2) Automatic Frequency Control (AFC): turn this option on
when your location is busy on the sensor radio spectrum to
improve signal reception.
(3) Temperature Compensation: Turn on this option to minimize
sun light influence on outdoor temperature measurement if the
outdoor temperature and humidity sensor installation site is not
ideal. This option works with sensor arrays like WS69, WS80,
WS90 and WS85.
(4) Auto Time zone: Your time zone setting on ecowitt.net will
be applied here.
(5) Automatic firmware upgrade
(6) Login & AP Password
(7) Restore default: The checkbox takes effect immediately after
saving and is not lost when the power is dropped.
To Next Page
Loading...
