1. Click on "My Devices".
2. Click on the "…" icon in the upper right corner of the
gateway.
3. You can edit your device name here if the default name
needs to be changed.
4. Click version button to check latest firmware version.
5. Set the Device's precise location and Timezone on this
interface. Tick "Auto DST" and "Is Public" when
necessary.
6. Click "Save", then reboot the device, it will
automatically synchronize time and DST.
Note: The current firmware version is displayed here. If an
update is available, a "yellow arrow" will appear next to the
version number. Tap on the version button to start the firmware
upgrade.
To Next Page
Loading...
