35
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Onboard IDE Controller Enabled
SATA Configuration IDE
Onboard SATA Mode Enabled
Onboard AUDIO Function Enabled
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Onboard 1394 Function Enabled
USB Functions Enabled
Legacy USB Support Enabled
Onboard JMB362 AHCI Mode
Help Item
Onboard 1394 Function (Enabled)
Use this item to enable or disable the onboard 1394 function.
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
DISABLED: disables the
integrated IDE
Controller.
Enabled: enables both
Controllers.
Onboard IDE Controller (Enabled)
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Press <Esc> to return to the main menu setting page.
Use this item to enable or disable the onboard IDE interface.
Onboard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Onboard JMB362 (AHCI Mode)
Use this item to enable or disable the onboard JMB362 mode.
To Next Page
Loading...
Need help?
General
