38
Using BIOS
DeltaT (+2)
SMART Fan Slope PWM value (3 PWM value/°C)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
This item is used to set the Slope Select PWM of the smart fan.
Press <Esc> to return to the PC Health Status page.
ECS supports the latest PECI host technology. While using Core
TM
2 Quad
or Core
TM
2 Duo CPU, the original images of the BIOS item “PC Health
Status” and “Smart FAN Function” will be replaced by PECI mode and
negative number. (The max data from PECI is zero.)
Hardware Health Event Monitoring
Smart Fan Function Press Enter
System Temperature 33°C/91°F
CPU Fan Speed: 2537 RPM
SYS FAN Speed: 0 RPM
CPU Vcore: 1.280V
VDIMM: 1.840V
-=- PECI Mode-=-
Offset to TCC Activation Temp.: -20
Help Item
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
PC Health Status
f
SMART Fan Control Enabled
SMART Fan start PWM value 28
SMART Fan start Offset (-) 30
CPU DeltaT +3
Fan1 Slope PWM value/1 Unit 5
Fan1 Full Speed Offset (-) 10
SMART Fan2 Control Disabled
Press <Esc> to return to the PC Health Status page.
mnlk
: Move
F10: Save ESC: Exit
Enter: Select
+/-/: Value
F9: Load Default Settings
F1: General Help
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Smart Fan Function
Help Item
Disabled
Enabled
Options
mnlk
: Move
F10: Save ESC: Exit
Enter: Select
+/-/: Value
F9: Load Default Settings
F1: General Help
To Next Page
Loading...
Need help?
General
