49
Intel
®
Remote Wake Technology
Chapter 5
Intel
®
Remote Wake Technology
About the Intel
®
Remote Wake Technology
Intel
®
Remote Wake Technology enables remote wake up of your home computer
from energy efficient sleep mode by enabled programs over the Internet.
While outside your home, with an Intel Remote Wake Technology (IRWT) enabled
program, you can wake up your computer from sleep mode. Upon the PC awakening,
you can access photos, music, movies, and documents through third party enabled
programs. These enabled programs can also wake your computer for backup or
tune up services, VoIP calls as well as a variety of other uses.
With Intel
®
Remote Wake Technology users will be able to reduce wasted energy,
by keeping their home PCs in energy-efficient sleep mode rather than fully powered
on, all the while still able to remotely access their PCs while on the road.
Intel Remote Wake Technology requires:
• Windows Vista Premium or Vista Ultimate (32-bit/64-bit)
• home PC to be in “Standby” (S3) or fully on mode,
• always-on internet connection. Works with existing/standard home
network router
• Intel LAN onboard
•3
rd
party IRWT enabled program and services (Cyberlink, ORB, Jajah)
The following pages assumes Cyberlink Live, available from Cyberlink
Corp., as an example of 3
rd
party IRWT enabled programs. Users are
advised to refer to the user manual for the 3
rd
party enabled programs
for detail installation and setup.
Note:
To Next Page
Loading...
Need help?
General
