ECS H61H2-I3 User Manual

Chapter 3
H61H2-I3 USER MANUAL
57
Administrator Password Status (Not Install)
This item shows administrator password installed or not.
User Password Status (Not Install)
This item shows user password installed or not.
System Mode state (Setup)
This item shows system mode setup or not.
Secure Boot state (Disabled)
This item allows you to enable or disable the secure boot state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs in
User Mode.
Secure Boot Mode (Custom)
This item is used to select secure boot mode, when you select standard mode, se-
cure boot policy is fixed; when you select custom mode, the image execution policy
and secure boot key databases are changeable.
This page enables you to set setup administrator password and user password.
Security Menu
Main Advanced Chipset M.I.B III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
Secure Boot mode selector.
‘Standard’ -fixed Secure
boot policy, ‘Custom’ -
changeable Image
Execution policy and Secure
Boot Key databases
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Administrator Password Status Not Install
User Password Status Not Install
Administrator Password
System Mode state Setup
Secure Boot state Disabled
Secure Boot Enabled
Secure Boot Mode Custom
Image Execution Policy
Key Management

ECS H61H2-I3 Specifications

General

Brand	ECS
Model	H61H2-I3
Category	Motherboard
Language	English