EcubMaker TOYDIY - Laser Function Menu

EcubMaker TOYDIY
Explanation
Laser 3D Printer Current Toolhead type
> Laser Print Guide Step by Step Laser guide
Utility
Back
Step1:Place Objects Try to place the objects in the
middle
Step2:Auto Home-Center
Machine will do auto-levelling
and detect the objects height.
Step3:Laser Prescan
Toolhead will move up-down &
Side left and right to ensure you
place the objects in the middle of
the platform.
Step4:Set Origin
Save the Previous 3 steps data.
You must done this step.
Step5:Print From SD
Select your print model from SD
card
EcubMaker TOYDIY
Laser 3D Printer
Laser Print Guide
> Utility
Back
> Set Laser Focus
Set the Laser focal length to
ensure the better Engraving,usally
you don't need to change it
ChangeToolHeader
Restore Defaults
Printer info
Back
Step1:Auto Home
Step2:Move to Center
Step3:Adjust focus
Step4:Adjust Finish
Menu Overview
--------------------------------------------------------------------------------------------------------------------------------------------
2.The menu of TOYDIY-Laser Function
B EcubMaker TOYDIY basic setup and installation
---------------------------------------------------------------------------------------------------------------------------------------
--------
18