What to do if EDAN CADENCE II Monitor TOCO sensitivity is too high?
If the TOCO sensitivity on your EDAN Monitor is too high (higher than 100 units), it could be because the uterus pressure is far higher than the average value. Ensure the TOCO transducer is well contacted with the abdominal skin. If necessary, reposition the TOCO transducer.
What to do if EDAN CADENCE II shows no trend?
If your EDAN Monitor is showing no trend, the intrauterine catheter may be jammed. Try washing it with a disinfector.
General| Display Type | TFT LCD |
|---|---|
| Parameters Monitored | ECG, SpO2, NIBP, RESP, TEMP, PR |
| Resolution | 800 x 600 |
| Touch Screen | Yes |
| ECG | 3/5-lead ECG |
| Battery | Rechargeable lithium-ion |
| Battery Life | Approx. 4 hours |
| Connectivity | WiFi (optional) |
| Storage Temperature | -20°C to 55°C |
| Relative Humidity | 95 % (non-condensing) |
| Atmospheric Pressure | 700 hPa to 1060 hPa |
Advises against actions or situations resulting in personal injury or death.
Advises against actions or situations causing equipment damage or inaccurate data.
Provides useful information regarding a function or procedure.
Specifies the intended purpose and user for the fetal monitor.
Guidelines for safe and proper operation of the fetal monitor.
Steps for unpacking and inspecting the monitor and accessories.
Procedure for installing or removing the rechargeable battery.
Overview of the monitor's capabilities and configurations.
Details on the monitor's display screen and its frames.
Categorization of alarms based on severity and priority.
Description of audible alarm sounds and how to manage them.
Explanation of visual alarm indicators and messages on the screen.
Overview of the built-in thermal recorder's functions.
Methods to confirm fetal life before starting monitoring.
Procedure for powering on the fetal monitor.
Verifying fetal life using external methods before using the fetal monitor.
Obtaining FHR via maternal abdominal wall using ultrasound transducer.
Conditions where DECG monitoring should not be used.
Monitoring twin FHRs using two ultrasound transducers.
Monitoring one twin externally and the second internally (DECG).
List of components needed for external UA monitoring.
Step-by-step guide for external UA monitoring.
List of components needed for internal UA monitoring.
Procedure for inserting and using the intrauterine pressure catheter.
Selecting the source for fetal movement detection (Manual or AFM).
Entering the patient's Bed ID for printing.
Entering patient's name and other details.
Regular checks and upkeep to ensure monitor performance and safety.
Detailed steps for cleaning the monitor enclosure and screen.
Cleaning instructions for transducers, leads, and belts.
Operating and storage conditions for the monitor.
Physical dimensions, weight, power, and standards compliance.
Solutions for when the monitor display is off.
Troubleshooting steps for audio noise during monitoring.
Solutions for paper jams and recorder malfunctions.
Guidance on electromagnetic emission compliance.
To Next Page
