EDAN iSe Series - Environment Requirements; Power Supply Specifications

iSE Series Electrocardiograph Service Manual Overview
- 13 -
Degree of safety of
application in the presence
of flammable gas:
Equipment not suitable for use in the presence of flammable
gas
Working mode:
Continuous operation
EMC:
CISPR 11, Group 1, Class B
3.1.3 Environment Requirements
Transport & Storage
Working
Temperature:
-20ºC (-4ºF) ~ +55ºC (+131ºF)
+5ºC (+41ºF) ~ +40ºC (+104ºF)
Relative Humidity:
15% RH~95% RH
Non-Condensing
15% RH~95% RH
Non-Condensing
Atmospheric Pressure:
70kPa ~106kPa
70kPa ~106kPa
3.1.4 Power Supply Specifications
Mains supply
Operating Voltage = 100 V-240 V~
Operating Frequency = 50 Hz / 60 Hz
Power Adapter: Output Voltage = 19 V, Output Current = 2.53 A
Input current=1.1 A
Li-ion Battery
Rated Voltage / Typical Capacity = 15.2 V / 3550 mAh
When the battery is fully charged, iSE can work (without printing)
continuously at least 8 hours.
100% recharge time: ≤ 5 hours
90% recharge time: < 4 hours