EDAN iSe Series - Entering Patient Information; Manually Entering Patient Information; Scanning Patient Barcode; Retrieving Orders from Server

iSE Series Electrocardiograph Service Manual Electrocardiograph Disassembly
- 34 -
6.3 Disassembling the Printer
Follow Section 6.2 to open the lower casing.
Unplug the wiring of main board according to the Figure 3-3
in section 3.2.4.
Detach the six screws that fix the main board.
Remove the antennas with a soldering iron.
Detach the screws and bolts that fix the printer to upper casing.
Figure 6-3 Printer disassembly
Symbol
Description
Round circle
Screws or bolts that fix the printer to device
Square circle
Antenna welding