EDAN SE-12 Series - Page 41

SE-12 Series Electrocardiograph User Manual Operation Preparations
- 35 -
SE-12/SE-12 Express/SE-1200/SE-1200 Express:
Step 1 Step 2 Folded paper / Rolled paper Step 3
1) Press the casing button downwards and remove the casing to open the recorder.
2) Take off the wrapper of the new folded paper, and then put it in the paper tray.
3) Pull the paper out with the grid side facing the thermal print head, and replace the casing
on the recorder.
If rolled paper is used, Place the paper and the roller gently in the recorder with the roller
pin clicking into the groove. Pull the paper out with the grid side facing the thermal print
head.
4) Press down the recorder casing firmly.
SE-1201 A5 paper：
Movable
Part 2
Movable
Part 1
Casing Button
Paper Tray
Groove
Paper Roller
Casing
Exit
Exit Edge
(Edge for
tearing paper)