SE-12 Series Electrocardiograph User Manual Operation Preparations
- 36 -
Step 1 Step 2
1) Press the casing button downwards to open the recorder.
2) Take off the wrapper of the new folded paper, and then put it in the paper tray with the
grid side facing the thermal print head.
3) Close the recorder casing firmly.
SE-1201 A4 paper:
Step 1 Step 3
1) Tilt the electrocardiograph and put the record paper to the paper tray through the
opening on the bottom panel with the grid side facing the thermal print head.
2) Press the casing button downwards to open the recorder.
3) Pull the paper out with the grid side facing the thermal print head, and close the recorder
casing firmly.
After loading paper,
1) Set Paper Marker to No in the Record Info Setup1 window.
2) Advance the recorder paper.
When the main screen is displayed, you can press to advance the paper for
2.5cm. Press again to stop advancing the paper.
To Next Page
Loading...
