EDGE30 / EDGE2440 / EDGE40 / EDGE2460 / EDGE60 / EDGE3860
Installation and Operating Manual
Original Instruction Manual 42 Rev 2.1 July 12, 2016
APPENDIX “A”
A1 Flat Rate Warranty Schedule
A1.1 Subject to the provisions of MF&B Warranty Policy and Procedure, the labor hours eligible for
reimbursement are limited to the following:
Diagnostic time:
Time is per incident and not cumulative. Tech. line 1-888-480-EDGE
1.0 Hours
Main Blower Motor: .75 Hours
Main Blower Motor Capacitor: .4 Hours
Flame Sensor: .5 Hours
Gas Conversion: 1.0 Hours
Gas Valve: .75 Hours
Induction Motor: .4 Hours
Transformer: .25 Hours
Ignition Control, Burner Control, Temp. Control or Speed Control: .4 Hours
Switch or Fuse Holder: .25 Hours
Conveyor Motor: .75 Hours
Hall Effect Sensor: .3 Hours
Control Box Cooling Fan: .25 Hours
Thermocouple: .4 Hours
Main Blower Relay: .25 Hours
R & R Control Can: .75 Hours
Set Gas Pressure: .5 Hours
A2 Labor Rate
A2.1 Subject to the provisions of MF&B Warranty Policy and Procedure, the labor rate for reimbursement
is $60.00 per man hour. This labor rate is effective for all customers unless written consent and
acknowledgment has been given the MF&B Service Department.
A2.2 Maximum allowance for troubleshooting labor is one (1) hour.
A2.3 Travel time is not to be included in labor hours. Only time spent on site will be reimbursed.
To Next Page
Loading...
Need help?
General
