EDGE30 / EDGE2440 / EDGE40 / EDGE2460 / EDGE60 / EDGE3860
Installation and Operating Manual
Original Instruction Manual 7 Rev 2.1 July 12, 2016
Installation Instructions
TOOLS REQUIRED:
(1) Genie SLA or similar lift
(4) 7” Cribbing Block
(1) 4-wheel dolly, pallet jack, or similar.
1. Remove the oven from the shipping crate. Inspect the oven for concealed shipping
damage before continuing.
2. For single- or double-stack installation only, install the casters onto the oven legs.
(Figure 3)
Figure 3
3. For single- or double-stack installation only, install the oven legs (with casters) onto
the oven base. For triple-stack installation only, install the casters directly onto the
oven base. (Figure 4)
Figure 4
To Next Page
Loading...
