Edge EDGE30 User Manual

EDGE30 / EDGE2440 / EDGE40 / EDGE2460 / EDGE60 / EDGE3860
Installation and Operating Manual
Original Instruction Manual 36 Rev 2.1 July 12, 2016
Maintenance
WARNING
Turn off the oven, disconnect the gas supply line, and unplug the electrical cord
(or lock out the electrical supply) before doing any cleaning or service work on the
oven.
To prevent personal injury from moving parts or electrical shock, do not try to
clean or disassemble any part of the oven with power applied and until the oven is
completely cooled down.
IMPORTANT
Before performing oven maintenance:

Turn off the oven.

Allow the oven to complete its cool down cycle.

Turn off the electrical supply to the oven or unplug the power cord from the
receptacle.

If the oven must be moved, close the gas supply shutoff valve, disconnect the
gas supply line at the oven, and unlock the casters so the oven can be moved
safely.
After performing oven maintenance:

Return the oven to its original location and lock the casters.

If the restraint cable was disconnected to move the oven, reconnect it now.

Reconnect the gas supply line and open the gas supply shutoff valve. Test the
gas supply connections for leaks.

Reconnect the electrical supply or plug the power cord into its receptacle.

The oven is now ready for normal startup and use.
CAUTION

Never use a water hose, pressure washer, or steam cleaner on ovens.

Never use metal scrapers, razor blades, steel wool, scouring pads, or any other
ferrous abrasives when cleaning ovens.

Edge EDGE30 Specifications

General

Brand	Edge
Model	EDGE30
Category	Oven
Language	English