40
8. Press the up and down arrow keys until you see the desired Engine
Temp level at which you want to be alerted and press [Enter] to set
that value.
9. Press the up and down arrow keys until you see the desired
Transmission Temp level at which you want to be alerted and press
[Enter] to set that value.
10. To change the Speed Alert value [default is 70] scroll to the Speed
Alert option and press [Enter]. The following screen appears:
11. Press the up and down arrow keys until you see the desired Speed at
which you want to be alerted and press [Enter] to set that value.
Note: If you desire to temporarily stop the Attitude from alerting you to a
specific threshold, while the actual alert is signaling you, press any key
(menu, arrow or enter) and the alert will temporarily stop. When all of the
alarm parameters drop below the set thresholds, then exceed them again, the
alert will start up again.
To Next Page
Loading...
