Need help?Do you have a question about the Edge Juice and is the answer not in the manual?
General| Category | Performance Tuner |
|---|---|
| Display | Digital |
| Vehicle Type | Truck |
| Type | Performance Module |
| Function | Engine Performance Enhancement |
| Adjustability | Multiple Levels |
| Compatibility | Vehicle Specific (check application guide) |
Details where and how to mount the module using provided Velcro.
Explains how to disconnect factory connectors and attach the module's harness.
Describes post-installation checks, securing harness, and the initial engine start procedure.
Explains the procedure to select power levels for different driving modes (Normal/Tow-Haul).
Details how to verify the currently set power level using engine revs.
Presents dyno-tested gains for each of the four power levels.
Provides the contact number for technical support.
Highlights the feature of monitoring EGT and automatically reducing power output.
Details horsepower and torque gains for levels 1-6, including Level 6 unlock info.
Details the procedure for drilling and tapping the exhaust manifold for the EGT sensor.
Shows images of the installed EGT sensor and tips for accessing the manifold.
Explains how to set the maximum exhaust gas temperature to prevent engine damage.
Describes how to temporarily disable the automatic power reduction triggered by high EGT.
Explains how to adjust fuel delivery at low boost for responsiveness and smoke control.
Describes options to reduce engine torque during gear shifts to improve transmission longevity.
Explains how to unlock the Level 6 power level by contacting technical support.
Describes how to select different power levels directly using the Attitude monitor.
Provides the support phone number and essential information to have ready before calling.
To Next Page
