18
Removing Control Panel
1) Remove the drip tray.
2) At the central control panel, remove the control knobs, then remove the 2 screws that attach each
knob bezel and remove them.
Tools Needed:
• Phillips Screwdriver
3) Unscrew the Phillips screws on the left and right sides of the control panel as well as the screw
that axes the gas manifold on the right side of the rebox.
4) At the rear right of the rebox, locate the 2 lighting connectors and disconnect them.
5) Lift the control panel and, together with the attached lighting cable, set aside.
To Next Page
Loading...
