23
Replacing the Burners
Replacing the Warming Rack Support Bracket
1) Remove all grates and accessories from the grill surface.
2) Remove the cotter pins from the cast peg to remove the burner.
3) Replace the burner and attach the cotter pins securely.
1) Follow the instructions in the section “Removing the Hood”.
2) Remove the warming rack.
3) Use a Phillips screwdriver to unscrew the screws at both ends of the support bracket.
4) Reinstall a new support bracket by following the above steps in reverse, replace the warming rack,
and reinstall the hood.
Tools Needed:
• Phillips Screwdriver
To Next Page
Loading...
