Management service admin state.
Telnet: Connect CLI through telnet.
SSH: Connect CLI through SSH.
HTTP: Connect WEBUI through HTTP.
HTTPS: Connect WEBUI through HTTPS.
SNMP: Manage switch trough SNMP.
Set session timeout minutes for user access to user interface. 0 minutes
means never timeout.
Retry count is the number which CLI password input error
tolerance count. After input error password exceeds this count, the CLI
will freeze after silent time.
After input error password exceeds password retry count, the CLI will
freeze after silent time.
IV-10-2-2 Management ACL
This page allow user to add or delete management ACL rule. A rule cannot be deleted if
under active.
To display Management ACL page, click Security > Management Access > Management
ACL.
Figure 96 - Security > Management Access > Management ACL
Display Management ACL name.
Display Management ACL whether active.