Edimax GS-5424PLC User Manual

219
IV-14-4-6 Trap Event
To configure and display SNMP trap event, click Management > SNMP > Trap Event.
Figure 173 - Management > SNMP > Trap Event
Item
Description
Authentication
Failure
SNMP authentication failure trap, when community not match or user
authentication password not match.
Link Up/Down
Port link up or down trap.
Cold Start
Device reboot configure by user trap.
Warm Start
Device reboot by power down trap.
IV-14-4-7 Notification
To configure the hosts to receive SNMPv1/v2/v3 notification, click Management > SNMP
> Notification.
Figure 174 - Management > SNMP > Notification
Item
Description
Server Address
IP address or the hostname of the SNMP trap recipients.
Server Port
Recipients server UDP port number.
Timeout
Specify the SNMP informs timeout.
Retry
Specify the retry counter of the SNMP informs.
Version
Specify SNMP notification version
 SNMPv1: SNMP Version 1 notification.

Edimax GS-5424PLC Specifications

General

Brand	Edimax
Model	GS-5424PLC
Category	Switch
Language	English