Edimax GS-5424PLC - IV-11-4 Ipv4 ACE

170
Item
Description
ACL Name
Input IPv4 ACL name.
ACL Name
Display IPv4 ACL name.
Rule
Display the number ACE rule of ACL.
Port
Display the port list that bind this ACL.
IV-11-4 IPv4 ACE
This page allow user to add, edit or delete ACE rule. An ACE rule cannot be edited or
deleted if ACL under binding. New ACE cannot be added if ACL under binding.
To display IPv4 ACE page, click ACL > IPv4 ACE.
Figure 128 - ACL > IPv4 ACE
Item
Description
ACL Name
Select the ACL name to which an ACE is being added.
Sequence
Display the sequence of ACE.
Action
Display the action of ACE.
Protocol
Display the protocol value of ACE.
Source IP
Display the source IP address and mask of ACE.
Destination IP
Display the destination IP address and mask of ACE.
Source Port
Display single source port or a range of source ports of ACE. Only
available when protocol is TCP or UDP.
Destination Port
Display single destination port or a range of destination ports of
ACE. Only available when protocol is TCP or UDP.
TCP Flags
Display the TCP flag value if ACE. Only available when protocol is
TCP.
Type of Service
Display the ToS value of ACE which could be DSCP or IP Precedence.
ICMP
Display the ICMP type and code of ACE. Only available when
protocol is ICMP.