11
III. Camera Setup
Your network camera’s unique SSID is displayed on the product label on
the product’s indoor main unit and consits of “EdiView.Setup**” where **
are the last two characters of your camera’s unique MAC address.
Now you need to connect your network camera to your network. There are
three easy ways:
A. With the free EdiView II app on Android or iPhone: II-1. EdiView II App.
B. Using a computer and EdiView Finder: II-2. EdiView Finder.
C. Using WPS (Wi-Fi Protected Setup), a simple method to connect your
camera to your wireless network. Refer to II-4. WPS.
After connecting your camera to your network using one of the methods
above, you can view your camera’s live image or configure its settings:
Local network:
A. Using the web based management interface (see IV. Web Based
Management Interface.).
B. Using the 16 channel viewer software (see VI. 16 Channel Viewer
Software).
Remotely (from any Internet connection):
A. Using the camera’s cloud ID (see V. Myedimax.com).
B. Using the EdiView II app.
To Next Page
Loading...
