Edimax IC-3116W - Page 33

33
Network Type
Select “DHCP” to automatically assign an IP
address to your network camera from your
router or “Static IP” to manually set a static IP
address using the fields below. “PPPoE” is an
additional option for advanced users.
IP Address
Static IP users specify an IP address here,
which will be the IP address of your network
camera.
Subnet Mask
Enter the subnet mask of the IP address.
Gateway
Enter the gateway address of your network.
Primary DNS
Enter the IP address of your primary DNS
server.
Secondary DNS
Enter the IP address of your secondary DNS
server (optional).
HTTP Port
You can edit the HTTP port number to any
value between 1024 – 65535. The default
value is 80.