Edwards E2M1.5 User Manual

this, use a gas-ballast control valve (refer to Solenoid operated gas-ballast control valve
on page 38).
We recommend, as described in the procedure below, decontaminang the oil before
shung down the pump, this will prevent damage to the pump by the contaminates in
the oil.
1. Refer to To decontaminate the oil on page 25 and decontaminate the oil, as
required.
2. Close the vacuum system isolaon-valve (if not already closed).
3.
Close gas-ballast (that is, turn the gas-ballast control clockwise).
4.
Switch o the electrical supply to the pump.
Page 26
A37132880_F - Operaon

Edwards E2M1.5 Specifications

General

Brand	Edwards
Model	E2M1.5
Category	Water Pump
Language	English