Edwards E2M1.5 User Manual

CE Declaration of Conformity
P20000760J
The following product
AXXX - YY - ZZZ
Pump type Variant Motor description
XXX YY ZZZ
E2M0.7 01 to 99 902 = 100-120V 50/60Hz Single Phase
A371 = or 912 = 200-230V 50/60Hz Single Phase
E2M1.5
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
2014/34/EU
ATEX directive on use in potentially explosive atmospheres.
Intertek Testing and Certification Limited, 0359
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
ATEX marking:
II 3 G Ex h IIB T4 Gc
INTERNAL ATMOSPHERES ONLY
TCF 218
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61010-1:2010
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
EN ISO 80079-36:2016
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
EN ISO 80079-37:2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources
''b'', liquid immersion ''k''
Documentation Officer:
Jelena Havelkova, Spielberk Office Centre, Holandska 10, Brno, 63900 Czech Republic,
: +42(0) 734 418 896, : documentation@edwardsvacuum.com
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 21
st
May 2020.
Petr Smerek – Engineering Manager
Scientific Vacuum Division
Lutin, CZ
Nina Buta – General Manager
Lutin, CZ
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK

Edwards E2M1.5 Specifications

General

Brand	Edwards
Model	E2M1.5
Category	Water Pump
Language	English