This product has been manufactured under a quality system certified to ISO9001:2008
P200-06-000 Issue C
Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
Low Volt Systems High Volt Systems
(200-230V) (380-460V)
iXH500H AC0E0xy23000 ACAE0xy23000
iXH3050H AC5E0xy23310 ACFE0xy23310
iXH3050HTX AC5E2xy23300 ACFE2xy23300
iXH4550HT AC6E1xy23300 ACGE1xy23300
iXH6050H AC7E0xy23300 ACHE0xy23300
iXH6050HT AC7E1xy23300 ACHE1xy23300
Where x = 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C or D depending on gas module type
Where y = 1 means ‘no check valve’ and y = 3 means ‘check valve supplied’
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements.
Part 2 - Vacuum Pumps.
EN61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. Part 1 - General Requirements.
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
Use - EMC requirements. (Industrial Location Immunity
- Class A Emissions)
EN50581:2012 Technical Documentation for the Assessment of Electrical and Electronic Products
with respect to the Restriction of Hazardous Substances
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2nd Edition July 12, 2004, including revision July 22, 2005 – Safety
Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 1: General Requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does
not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
22.10.2013, Burgess Hill
Mr Mark Hope, Global Technical Support Manage
To Next Page
Loading...
Need help?
General
