P200-06-620 Issue B
Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
Low Volt Systems High Volt Systems
(200-230V) (380-460V)
iXL250Q AS43001x2300 ASE3001x2300
iXL750Q AS46001x4300 ASE6001x4300
iXL750R AS56001x4300 ASF6001x4300
Where x = 2 means 'standard booster oilbox evacuation' and x=3 means 'external booster oilbox evacuation'
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN1012-2: 1997 Compressor and Vacuum Pumps Safety Requirements. Part 2 - Vacuum Pumps
EN61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use. Part 1 – General Requirements.
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory use - EMC requirements
(Industrial Location Immunity – Class A Emissions)
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition July 12, 2004, including revision July 22, 2005 -
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General
Requirements
when installed in accordance with the instruction manual supplied with the pump,
following the provisions of:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
2006/42/EC Machinery Safety Directive
Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
Mr Mark Hope, Global Technical Support Manager Date and Place
This product has been manufactured under a quality system
To Next Page
Loading...
Need help?
General
