© Edwards Limited 2011. All rights reserved. Page 5
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
S149-01-880 Issue F
Figure 4 - 412-J pump general arrangement
1. Oil level sight glass
2. System lift eye-bolt
3. Motor lift eye-bolt
4. Reservoir cover
5. Oil flow indicator
6. 1/2 inch vacuum access port
7. Oil drain port, dead end
8. Vacuum exhaust connection
9. Motor
10.Oil fill port/pressure relief
11.Water outlet connection
12.Solenoid valve
13.Oil temperature sensor port
14.Oil temperature heater port
15.Oil drain valve
16.Water inlet connection
17.Gas ballast purge connection
18.Gas ballast adjustment
19.1/4 inch vacuum access port
20.Belt guard
21.Vacuum inlet connection
To Next Page
Loading...
