Edwards XDS46i User Manual

CE Declaration of Conformity
P20001400N
The following product
XDS35i scroll pump, set to High volts
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-YY-983
XDS35i scroll pump, set to Low volts
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-YY-986
XDS35i scroll pump, no gas ballast
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-05-983
XDS35iC scroll pump
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-06-983
XDS35iE scroll pump, enhanced
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-03-983
XDS35iE scroll pump, enhanced, no gas ballast
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-07-983
XDS35iCE scroll pump, enhanced
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A730-08-983
XDS46i scroll pump
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A731-01-983
XDS46iC scroll pump
100-120 V, 200-230 V, 1 ph, 50/60 Hz
A731-06-983
II Internal 3 G Ex h IIB T4 Gc
YY = 00 to 99
XDS100B scroll pump Note: no ATEX rating
100-120 V, 200-230 V, 1 ph, 50/60Hz
A732-01-983
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
2014/34/EU
ATEX directive on use in potentially explosive atmospheres
2014/30/EU
Electromagnetic compatibility (EMC) directive
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN ISO 80079-36:2016
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
EN ISO 80079-37:2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'',
liquid immersion ''k''
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
Class A Emissions, Industrial Immunity
Documentation Officer:
Jelena Havelkova, Spielberk Office Centre, Holandska 10, Brno, 63900 Czech Republic,

: +42(0) 734 418 896,

: documentation@edwardsvacuum.com
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 29
th
October 2019
Petr Smerek – Engineering Manager
Scientific Vacuum Division
Lutin
Ian Keech – General Manager
Product Company
Lutin
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK

Edwards XDS46i Specifications

General

Brand	Edwards
Model	XDS46i
Category	Water Pump
Language	English