EFI IQ-501 - Printer Profiling using Printer Module of FCPS; Starting FCPS and Accessing Printer Module; Initiating Print Patches and Server Selection

How-To: Using the IQ-501 with the Fiery server
11
Printer Proling using the Printer module of FCPS including G7 calibration
You must have purchased and installed a license
for FCPS to use this feature.
1. Start Fiery Color Proler Suite (FCPS).
3. Click on the Printer icon.
4. Click on Print Patches.
5. Enter an appropriate name for your prole.
6. Select the Fiery server.
The Fiery model appears and CMYK is
preselected.
7. Click Next.