EFI IQ-501 - Fiery Color Verifier; Starting FCPS and Accessing Preferences; Selecting Verifier Tab and Acknowledging Message; Server, Instrument, and OK Confirmation

How-To: Using the IQ-501 with the Fiery server
27
Fiery Color Verier with three reference preset choices
You must have purchased and installed a license
for FCPS to use this feature.
The rst time you use Fiery Color Verier with
the IQ-501 you will need to set the preferences
as follows.
1. Start Fiery Color Proler Suite (FCPS).
2. From the menu select Edit>Preferences...
3. Select the Verier tab from the Preferences
window.
4. Read and acknowledge the pop-up message.
5. Select the Fiery server. Click on the “+” to
discover the Fiery server if not listed.
6. Select the IQ-501 in the Instrument pull down.
7. Click OK.