EFI IQ-501 - Initiating Verification with Verify Icon; Selecting Reference Presets and Printing; Selecting Chart Size and Printing Control Strip

How-To: Using the IQ-501 with the Fiery server
28
Once the Presets have been adjusted.
8. Click on the Verify icon.
9. Select one of the three reference presets
available when the IQ-501 has been preselected.
• Fogra 2.2 media wedge.
• Fogra 3.0 media wedge.
• ISO12647-7 Control Wedge 2013.
10. Click Print to continue.
11. Select an appropriate Chart size for the media
you wish to use.
12. Click Print to continue.