EFI IQ-501 - Media Attributes and Control Strip Measurement; Verifying Measurements Against Reference

How-To: Using the IQ-501 with the Fiery server
29
13. The Fiery Measure job properties window
opens.
14. Select the Media tab.
15. Select the media attributes for the media you
wish to use.
16. Click OK to print and measure the selected
control strip.
The results of the Fiery measure module are
automatically displayed with the selected control
strip.
17. Click Next to continue and verify the
measurements with the selected reference.
18. The results are displayed based on predened
tolerances.