EFI Pro 30f User Manual

Printer Setup
Document ID: OMM-00174 Rev. D Pro 30f Operations Guide 37
6. Start the EFI Pro 30f GUI software
NOTE: Printer initialization will begin. Print carriage moves up, down, and forward, then returns to home position.
When complete, see status window for "Printer is ready" message.
Caution: Gantry moves forward during printer initialization sequence. Take care to prevent
contact between gantry and foreign objects.
Figure 5-8 EFI Pro 30f GUI Software
E
“Printer is Ready” Status Message
E

EFI Pro 30f Specifications

General

Brand	EFI
Model	Pro 30f
Category	Printer
Language	English