Document ID: OMM-00174 Rev. D Pro 30f Operations Guide iv
1.0 INTRODUCTION 6
1.1 Before Starting 6
1.2 Training 6
1.3 Welcome 6
1.4 Overview 6
1.5 Customer Support Web Site 7
2.0 SAFETY 9
2.1 Main Printer Safety Features 9
2.2 Emergency Stop Push Buttons 9
2.3 Safety Labels 10
2.4 Safety Labels - Printer Beam 10
2.5 UV Light Hazards 11
2.6 Ink or Maintenance Fluid Emergency 11
2.7 First Aid - Inks and Solvents 12
3.0 HARDWARE OVERVIEW 14
3.1 Front Access 14
3.2 Rear Access 21
4.0 SOFTWARE OVERVIEW 27
4.1 Tool Bar 28
4.2 Test Printer Settings Window 29
5.0 PRINTER SETUP 33
5.1 Printer Power On 33
5.2 Load Media 40
5.3 Purge and Sweep Print Heads 42
5.4 Perform Nozzle Checks 43
6.0 PRINTER OPERATIONS 45
6.1 Print File from Pro 30f Main Interface 45
6.2 Printing with Fiery XF 46
6.3 Recovering from an Error 47
6.4 Shutting Down Printer 49
7.0 INK SYSTEM 52
7.1 Use Remainder Ink 53
8.0 PRINT HEAD CARE 55
8.1 Preparing to Print 55
8.2 Recovering Print Heads 57
8.3 Printing and Analyzing the AcTarg 57
Table of Contents
To Next Page
Loading...
Need help?
General
