Need help?Do you have a question about the Efka Variocontrol V820 and is the answer not in the manual?
General| Output Signal | 4...20 mA |
|---|---|
| Supply Voltage | 24 V DC |
| Pressure Connection | G1/4 |
| Housing Material | Aluminum |
| Protection Class | IP65 |
Details on different access levels (Operator, Technician, Supplier) and their code numbers.
Instructions for operating the V810 control panel, including code input and parameter settings.
Instructions for operating the V820 control panel, including code input and parameter settings.
How to set the maximum machine speed directly using the control panel.
Guide to programming sequences of seams with various stitch functions.
Setting the motor rotation direction using parameter 161.
Setting reference positions and signal/stop positions using parameters 170-172.
Determining maximum speed based on parameter 111 and application requirements.
Setting the maximum operational speed using parameter 111.
Enabling and configuring softstart for gradual acceleration at start or new seams.
Functions for automatically lifting the sewing foot at various stages of sewing.
Configuring single, double, or off start backtack operations.
Configuring single, double, or off end backtack operations.
Configuring machine run blockage functions and safety switch operation.
Configuring speed limitations using various methods like DB2000/DB3000 and analog inputs.
Detailed functions and parameters for thread trimming and wiper operations.
To Next Page
