Efka Variocontrol V820 - Operation; Access Authorization upon Command Input

EFKA DA82GA3312
8
3 Operation
3.1 Access Authorization upon Command Input
In order to prevent unintentional changes of preset functions the command input is distributed at various levels.
The following persons have access: - the supplier to the highest and all subordinate levels using a code number
- the technician to the next lower and all subordinate levels using a code
number
- the operator to the lowest level without using a code number
ACaCCallufruf
Call-up
Supplier: Code number for the
control panel is
3112
Supplier Level
200 series of
parameter numbers
Technician: Code number for the
control panel is
1907
Technician Level
100 series of
parameter numbers
Operator Level